Discover more in our FAQ

Sketch Australia is proudly based in Melbourne, with two showroom locations in Cranbourne West and Sunshine North. We also have distribution partnerships across the country and offer nationwide delivery, making our products accessible Australia-wide.

Please see our section “Where to buy” on our website for the nearest Sketch Australia showroom or local representative.

Sketch Natural Flexible Stones are ultra-thin sheets of 100% real stone veneer, backed with either fiberglass/ fabric that allows them to be flexible, lightweight, and easy to install.

Made from natural stone surfaces such as slate, marble, and sandstone, each sheet retains the authentic look and texture of stone while being suitable for curved and flat surfaces alike.

The stone veneer sheets can be used for projects internally and externally.

Sketch stone veneers can be installed on a wide range of surfaces including cement board, drywall, plywood, MDF, tile, brick, and painted walls. The surface should be clean, dry, and free of dust or grease to ensure proper adhesion. For best results, we recommend using the appropriate adhesive based on the installation surface and environment.

Yes. Sketch stone veneer sheets can be installed over existing tiles, brickwork, concrete blocks, laminate, painted pasteboard, kitchen spashbacks, glass, furniture. Please contact Sketch Australia for more information for guidance for these types of installations.

Our stone veneer sheets are highly flexible and can be curved around cylindrical surfaces with a minimum radius of approximately 25 cm. This makes them ideal for both flat and slightly curved applications, such as feature walls, columns, and cabinetry. However, flexibility may vary slightly depending on the backing type and product range.

Made from 100% real stone

Lightweight and flexible (bends around curves)

Easy to cut and install

Suitable for indoor and outdoor use

Heat and moisture resistant when sealed

Waterproof

Ideal for walls, ceilings, furniture, and curved surfaces

Our large panels (2700mm x 1200mm) weigh around 10kg, while the smaller panels (1220mm x 610mm) weigh approximately 3–5kg, making them lightweight and easy to handle.

Sketch natural stone veneers can be used for interior and exterior walls, bathrooms, kitchens, splashbacks, feature walls, ceilings, furniture, fireplaces, and even curved surfaces. They're ideal for residential, commercial, and hospitality projects.

Absolutely. The sheets are suitable for wet areas including shower recesses. We recommend using a sealant over the surface for maximum protection of the surface.

The front is made of 100% natural stone, while the backing consists of fiberglass/ polyester resin. The translucent product only consists of a clear acrylic backing allowing light to be illuminated.

Sketch stone veneers are highly fire-resistant and suitable for use in areas with temperatures up to 120°C, in line with recommended standards.

The thickness ranges from 1mm - 2 mm.

Yes, Sketch stone veneers are waterproof and suitable for wet areas such as bathrooms and shower walls.

Yes, Our stone veneer sheets are highly flexible and can be curved around cylindrical surfaces with a minimum radius of approximately 25 cm.

Yes, they are durable, impact and moisture resistant & require very little maintenance once sealed.

Yes, Sketch stone veneers are highly versatile and can be used for a wide range of applications including walls, feature panels, fireplaces, splashbacks, and more—both indoors and outdoors. Their flexibility and durability make them ideal for many design projects.

Sketch Stones offer the natural beauty of real stone with the added benefits of being lightweight, flexible, and easier to install than traditional stacked stone. They provide a sleek, modern finish without the heavy bulk, making them ideal for a wider range of applications and faster installation.

The main benefits include:

Lightweight Design: No need for substrate structural reinforcement, allowing for more design flexibility.
Ease of Installation: No specialists required. Quicker and simpler to install compared to traditional stacked stone with significantly less adhesive to fix on to substrates.
Flexible Application: Can easily conform to curves and intricate design features.
Durability: Requires minimal maintenance and is resistant to stains once sealed.

For most applications polyurethane or some MS hybrid polymer construction, or epoxy based adhesives are suitable. Contact Sketch Australia for recommendations based on your project.

Transparent clear polyurethane or neutral cure silicone adhesives/sealants are suitable.

Sketch Stones are designed for effortless installation with no specialist tools required. Installations can often be completed by carpenters, cabinet makers, reasonable DIY or handyman services.

No, Sketch Stones are crafted for lasting beauty and require minimal maintenance due to their durability. We recommend using a sealant for better results.

Traditional stacked stone is heavy, requires structural reinforcement, engineering of substrates to hold substantial weight, requires complex installation process utlising trade professionals like tilers and stone masons, and leaves a significant carbon footprint due to quarrying.

Sketch stone veneers are made from natural, responsibly sourced materials and use less stone compared to traditional stone cladding, reducing environmental impact. Their lightweight design lowers transportation emissions and allows for easier installation with less waste. This makes them a more sustainable and eco-friendly choice for your projects.

You can learn more about Sketch Stones by visiting our website, where we provide detailed product information, galleries, and installation guides. For personalized assistance, feel free to contact our team or arrange a video call to see our products in action and ask any questions you may have.